Sheridan
Kategorien
0Warenkorb
TENSTAR INA226 INA231 IIC I2C Interface Bi-Directional Current/Power Monitoring Sensor Module CJMCU-226
TENSTAR INA226 INA231 IIC I2C Interface Bi-Directional Current/Power Monitoring Sensor Module CJMCU-226
Eine Rezension schreiben
$696
Dem Warenkorb hinzufügen

TENSTAR INA226 INA231 IIC I2C Interface Bi-Directional Current/Power Monitoring Sensor Module CJMCU-226

DH-1465-453a67dd499cdabfa6348a97
Eine Rezension schreiben
+ −
zur Wunschliste hinzufugen Vergleichen
Bestellungszeit und Rate
Alle Variationen als Liste anzeigen
Kalifora
Kalifora ist ein globaler Online-Marktplatz, auf dem Sie Produkte aus aller Welt entde...

Stadt: EN, Sheridan

Stelle eine Frage Über den Verkäufer
Description
 
INA226 Module
Description
The INA226 is a current shunt and power monitor with an I2C™- or SMBUS-compatible interface. Thedevice monitors both a shunt voltage drop and bussupply voltage. Programmable calibration value,conversion times, and averaging, combined with aninternal multiplier, enable direct readouts of current inamperes and power in watts.
The INA226 senses current on common-mode bus voltages that can vary from 0 V to 36 V, independent of the supply voltage. The device operates from a single 2.7-V to 5.5-V supply, drawing a typical of 330μA of supply current. The device is specified over the operating temperature range between –40°C and125°C and features up to 16 programmable addresses on the I2C-compatible interface
Features
Senses Bus Voltages From 0 V to 36 V
• High-Side or Low-Side Sensing
• Reports Current, Voltage, and Power
• High Accuracy:
– 0.1% Gain Error (Max)
– 10 μV Offset (Max)
• Configurable Averaging Options
• 16 Programmable Addresses
• Operates from 2.7-V to 5.5-V Power Supply
• 10-Pin, DGS (VSSOP) Package
Applications
• Servers
• Telecom Equipment
• Computing
• Power Management
• Battery Chargers
• Power Supplies
• Test Equipme
Pin Description

  • VBUS: bus voltage input

  • SDA/SCL: IIC bus data and clock signal lines

  • ALERT: Multi-function alarm output

  • A0/A1: IIC address line

  • IN+/IN-: non-inverting analog input, inverting analog input



INA231 Module


The INA231 is a current shunt and power monitor with a 1.8V I2C-compatible interface (featuring 16 programmable addresses). This device monitors the shunt voltage drop and bus supply voltage, providing enhanced protection by asserting the ALERT pin when corresponding values exceed programmed limits.


Programmable calibration values, conversion times, and averaging combined with an internal multiplier enable direct readings of current values in Amperes and power values in Watts, thus reducing the host processing load.


INA231 measures current on a bus voltage ranging from 0V to 28V and is powered by a single supply ranging from 2.7V to 5.5V, consuming 330μA (typical) of supply current. The operating temperature range for the INA231 is rated from -40°C to +125°C. There are two versions of the INA231: the INA231A starts up performing continuous conversions of shunt and bus voltage, whereas the INA231B starts up in a low-current shutdown mode; this module uses the INA231A version.



Features:

Bus voltage sensing range of 0V to 28V

High-side or low-side sensing

Current, voltage, and power reporting

High accuracy:

0.5% gain error (maximum)

50μV offset (maximum)

Configurable averaging options

Programmable alert thresholds

1.8V I2C compatible

Operating voltage range: 2.7V to 5.5V

Startup mode options: INA231A: Active conversion

Module dimensions: 18*19.4mm


Product specifications

Brand NameTENSTAR ROBOT
Country of originChina
ConditionNew
TypeVoltage Regulator
Supply Voltage5V
Dissipation Power1
Operating Temperature1
ApplicationComputer
PackageSOP
Features
Variant
Color: Blue [12000036253290805]
Bewertungen

Keine Bewertungen gefunden

Das könnte Sie interessieren
  • Beliebteste Produkte
  • Angebote
  • Zuletzt angesehen