QY6-0087 QY6 0087 Print Head Printhead for Canon MAXIFY MB 2140 MB2140 IB4020 IB4050 MB2710 IB4080 IB4180 MB5410 Printer Parts
QY6-0087 QY6 0087 Print Head Printhead for Canon MAXIFY MB 2140 MB2140 IB4020 IB4050 MB2710 IB4080 IB4180 MB5410 Printer Parts
$19200

QY6-0087 QY6 0087 Print Head Printhead for Canon MAXIFY MB 2140 MB2140 IB4020 IB4050 MB2710 IB4080 IB4180 MB5410 Printer Parts

1000072973
Tarifs et délais de livraison

Delivery options

Choose your country and city

Delivery destination

Estimate for the selected variant. Final delivery cost is checked at checkout. Postal-code coverage is not guaranteed.

Kalifora est une marketplace internationale qui facilite la découverte et l’achat de p...
Description

QY6-0087 QY6 0087 Print Head Printhead For Canon MAXIFY MB 2140 MB2140 IB4020 IB4050 MB2710 IB4080 IB4180 MB5410 Printer Parts

Name Printhead ; Print head ; Printer head ; Printer Nozzle
Compatible Printer Model

For Canon MAXIFY MB2010 MB2710 (LA)

For Canon MAXIFY MB2020/MB2320 /MB2120/MB2720 (USA)

For Canon MAXIFY MB2330/MB2030/MB2130/MB2730 (JA)

For Canon MAXIFY MB2340/MB2040/MB2140/MB2740 (ME)

For Canon MAXIFY MB2050/MB2350/MB2150/MB2750 (EUR)

For Canon MAXIFY iB4060/MB2060/MB2360 (AU)

For Canon MB2090MB2390 (KOR)

For Canon MB5110 MB5180 MB5080 MB5050 MB5020 MB5350

For Canon IB4020 IB4050 IB4080 IB4180 MB5320 MB5310

Printhead Quality

Original recycle 99% new ; 100% Test OK Before Shipping

Delivery Date Within 1~3 working days once order confirmed
Delivery By Air/Sea/DHL/FEDEX/UPS/TNT/ARAMEX/EMS/POST...
Detailed information

 ⇒ Detail Image

More printer head as below:

Printer Head Installation:

1. The nozzle of the head is very fragile and must not be bumped. It must be protected. Its surface is a piece of aluminum, and the inner layer is coated with a crystal oscillator and a very fine ink tube. When it touches, it will be concave, deformed, or even broken, so the nozzle will be scrapped;

 

2. Be careful when installing the nozzle. Always power off and put it in place. After loading, gently push the car to move left and right, check whether it is smooth, do not install it and power it on, because if the head is not in place, the car will easily break the head when it moves, and the hand feels freely. , strong controllability;

 

3. When connecting the plug cable, do not bring the ink, and make sure that it is in good contact with the socket and does not touch the foot. Otherwise, the nozzle will be short-circuited and burnt;

 

4. The steel shaft should also be clean and smooth. It can be wiped with a paper towel and glued. Do not directly add oil to the shaft. Excess oil will flow to the nozzle and cause damage.

 

5. After the machinery and circuit are correct, it is necessary to check the waterway. First, look at the insufficient amount of water in the ink cartridge. Secondly, check whether the small cleaning blade and the ink suction pump are dirty.

 

6. There will be air inside the nozzle that has just been installed, so it will not print normally immediately. Only when the air in the head is completely discharged can the line be normal;

 

First of all, intermittent cleaning (only 2 times at a time, then 30 minutes after stopping for 2 minutes) will be over-washed many times, which will cause the cleaning pump to accumulate ink, which will not only make the printer mix colors, leak ink, but also waste ink;

 

Secondly, you can print more pictures to let the nozzle discharge air during work;


Again, if the machine has led to the waste ink tube, you can first power off, and then use a syringe to cover the rubber tube to pump the ink tube until 3-5ml of ink is drawn.


Then turn it on again, use the machine to clean it once, which is equivalent to artificially pumping out the air in the head. The side effect is easy to cause the cleaning pump to pile up.

 

Printhead Should Only be Replaced by Trained Service Personnel. Change the printhead is a technical job, if you don’t understand technology, there is a big risk to change it by yourself, will be easily burn the printhead and the main board. We suggest you to find the trained service personnel to help you change the printhead.

 

Warranty: Guarantee TESTING on the machine is good. You can return it back within 3 months (from shipping date by seller until receipt returned goods) if Installation with problem (non-human damage). In addition, our engineers will also provide you with professional technical support.

Production Flow

TM: cn200139245

TM: angelcopier

Product specifications

MaterialFrom Japan
Place of OriginJapan
BrandTenchi
Product namePrinthead ; Print head ; Printer head
Usagefor Canon Inkjet Printer
ConditionOriginal recycle 99% new
OEM#QY6-0087 QY6 0087
PackingNeutral And Strong Packing
WarrantyOnly guarantee TESTING on the machine is ok
Delivery TimeWithin 3-5 Working Days
ShippingDHL UPS TNT FEDEX EMS
Payment termTT Westerm Union MomeyGram Paypal
Single package size:15X11X9 cm
Single gross weight:0.300 KG
Features
Condition
Original recycle 99% new
Delivery Time
Within 3-5 Working Days
Material
From Japan
OEM#
QY6-0087 QY6 0087
Packing
Neutral And Strong Packing
Payment term
TT Westerm Union MomeyGram Paypal
Place of Origin
Japan
Product name
Printhead ; Print head ; Printer head
Shipping
DHL UPS TNT FEDEX EMS
Single gross weight:
0.300 KG
Single package size:
15X11X9 cm
Type
print head
Usage
for Canon Inkjet Printer
Variant
Type: print head / Color: Black
Warranty
Only guarantee TESTING on the machine is ok
Color
Black
Commentaires

Aucun avis trouvé

Cela pourrait vous intéresser
  • Les plus populaires
  • Promotions
  • Récemment consultés