For Bambu Lab A1/A1mini LED Light Strip Ra95 Fill Light 24V Super Bright Bambulab 3D Printer Accessories

[A1/A1 Mini High-Brightness Fill Light Upgraded]

Before applying the light strip, please thoroughly clean the adhesive surface.

!!! Do not look directly at the open lamp bead!!!

Protecting the Printer Motherboard: Achieving lower power consumption and higher brightness through more rational lens design and more efficient LED bulbs.

InnoTech Exclusive Customization: Features high temperature resistance, yellowing resistance, ultra-wide illumination range, Ra95 high color rendering index, and comes with high-adhesion traceless adhesive. Compared to ordinary light strips, it is more resistant to high temperature, higher brightness, wider irradiation range, and high color rendering allows you to see multi-color models without color bias. Not easy to yellow and dark, more suitable for printer high temperature scenarios.If you do not need such a high brightness can be cut off 1-2 lamp beads according to demand.

It can be installed on the [Gantry Base], under the X-axis crossbeam, on the side of the Z-axis column, and other suitable flat surfaces for pasting.

Powered by the Ams lite interface on the body, the A1 and A1 mini are two different versions of the light strip and the line length is different, with switches.

[Free Nylon Cable Ties, Protective Tape & Cleaning Cloth]

Why is it difficult to fix my fill light on the X-axis?

The X-axis crossbeam often has invisible grease. Before applying the light strip to the X-axis crossbeam, please clean it with [dish soap and warm water] or [isopropyl alcohol]. If the fill light gets grease, gently wipe the adhesive tape with an alcohol wipe to restore its adhesion.

You can install the fill light under the X-beam or on top of the 3D printer.

A1 Mini Print accessories installed on top：➡️MakerWorld|559639 - A1 Mini Fill Light-LED LIGHT KIT⬅️

A1 Print accessories installed on top：Stay tuned. You can also directly attach it to the top beam.

Adding heat shrink tubing can easily cause the fill light to gradually fall off, leading to disasters. According to laboratory tests, the welded part can be safely touched at will.

InnoTech guarantees that the A1 fill light produced has passed the CE safety certification and can be safely used on your Bambu lad printer. If necessary, we can show you the CE safety certificate.

Product specifications